K-Array Vyper-KV25R II
تماس برای خرید
The Vyper-KV25R II is an ultra-flat passive loudspeaker comprised of four 1” neodymium magnet transducers each, housed in an elegant yet sturdy aluminum chassis, designed for in-wall recessed installations.
The four closely-spaced cone drivers provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker.
Two different values of impedance (8Ω – 32Ω) allow to connect up to 8x Vyper-KV25 II loudspeakers at 32Ω impedance to the same 4Ω amplifier output channel, which eliminates the need for 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory.
KV25R II black model
KV25RW II white model
KV25RX customizable RAL color and finish (box + grille)
new! KV25RM II, KV25RMW II, KV25RMX II (only RAL colors) = MARINE TREATMENT (on request)
All Vyper-KV25 components are designed by the K-array R&D department and are custom-made under the K-array quality control system.
Specifications
General
-
Type:
Line array
-
Transducers:
4 x 1″ neodymium magnet woofers
-
Frequency Response:
150 Hz – 18 kHz (-6 dB)
(1) -
Max SPL:
108 dB (peak)
(2) -
Rated Power:
75 W
-
Coverage:
V. 25° | H. 140°
-
Connectors:
2PIN euroblock connector (included)
-
Nominal Impedance:
8 Ω / 32 Ω selectable
Handling and Finishes
-
Dimensions (W x H x D):
50 x 270 x 37 mm (1.95 x 10.63 x 1.45 in)
-
Weight:
0.4 kg (0.88 lb)
-
Material:
Aluminum
-
Colors:
Black, White, Custom RAL
-
Finishes:
24K Gold, Polished
Regulations
-
IP Rating:
IP65
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
| برند |
K-ARRAY | کی ارری |
|---|
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.