K-Array KR200s Redline
• Unique performance-to-size ratio
• High power 127dB continuous, 133dB peak
• Fitted with integral handles
• Line array emission wavefront
• Integrated mounting system
• DSP on board with 16 dedicated presets
• Remote PC control software (RS485)
• Ultra fast set-up and dismantling system
۲,۱۵۴,۰۰۰,۰۰۰ تومان
موجود در انبار
The K-array Redline Series KR200s is a compact and efficient portable powered PA/stage monitor system ideal for Concert Halls, Theatre, Houses of Worship and AV presentations
It is comprised of the KL18ma self-powered subwoofer with an additional DSP controlled powered output and 35mm pole adaptor designed for a KR200 ultraslim line array satellite speaker.
The K Array KR200 is comprised of 2 x two meters stainless steel chassis each containing 32 x 2” neodymium transducers. They are 5.5 cm wide and 7 cm deep, weighing 9 Kg total. They are hinged together for focusing and easier transport. Due to the slim profile and minimum distance between drivers it reproduces the full vocal frequency range with clear intelligibility and excellent phase coherent 120° x 7° coverage.
The 18” long-excursion speaker of the KL18ma sub section employs a neodymium magnet and 3” voice coil. The large ports are designed to be fully symmetrical to the speaker, which means the back loading on the driver is consistent and even, with no port air turbulence. The cabinet weighs a mere 20 Kg. The triangle port construction provides excellent structural integrity and strength, effectively eliminating any box resonance.
The overall system response is from below 40 Hz to 19KHz with 127dB continuous and 133 dB peak output.
An internal DSP module provides control presets. The output can optionally be used to power the KL18 passive subwoofer. Dedicated software allows for remote control of the system from a PC
Features
• Unique performance-to-size ratio
• High power 127dB continuous, 133dB peak
• Fitted with integral handles
• Line array emission wavefront
• Integrated mounting system
• DSP on board with 16 dedicated presets
• Remote PC control software (RS485)
• Ultra fast set-up and dismantling system
Specifications
| Speakers power handling | 800(sub) + 500(sat) w(EAS) |
| Max power | 1200(sub) + 1200(sat) w 1 |
| Impedance | 8Ω(sub)+16Ω(sat) |
| Frequency range | 30Hz – 19 KHz +/- 3dB (preset dependent) |
| SPL 1W/1mt | 97 dB (sub) 101 dB (sat) 2 |
| Maximum SPL | 127dB continuous – 133 dB peak |
| Horizontal Coverage | 100° |
| Vertical Coverage | 7° |
| Crossover Type | DSP controlled |
| Frequency | 150 Hz minimum (preset dependent) |
| Low frequency Transducer | 1 x 18” Neodymium speakers with 3” voice coil |
| High frequency Transducer | 32 x 2” Neodymium speakers with 0,75” voice coil |
| Audio Input Connectors | male + female parallel 3-pin balanced XLR |
| Wiring | Pin1 = ground – Pin2 = hot – Pin3 = cold |
| Audio powered Output Connector | Female Speakon |
| Wiring | Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C. |
| Remote control Input Connectors | 1 x female 8 poles RJ45 |
| Power Input Connectors | 2 x PowerCon IN/OUT |
| Amplifier Type | 1 modules class D – DSP controlled |
| Subwoofer power | 1000 Watt 3 @8Ω |
| Satellite power output | 1000 Watt 3 @8Ω |
| Protection | Dynamic limiter, over current, over temp, short circuits |
| AC power Operating range | 210 – 240 Vac 50Hz (Default) 100 – 120 Vac 60Hz (Selectable) |
| I. nom | 5.5 A / 115 Vac – 2.9 A / 230 Vac |
| Minimum operation voltage | 95 Vac – 195 Vac |
| Maximum operation voltage | 125 Vac – 205 Vac |
| Max continuos and burst current | Default 6A(>10 sec) – 12A (10 sec) – 20A (<1sec) |
| Physical Dimensions | KL18ma: 46.5 x 47.5 x 61 cm (18.31”x 18.70” x 24.02”) KR200: 5.7 x 222.5 x 7.4 cm (2.24”x 87.60” x 2.91”) |
| Weight | KL18ma: 25.8 Kg (56.88 lbs) KR200: 8.2 Kg (18.08 lbs) |
| برند |
K-ARRAY | کی ارری |
|---|---|
| سایز بلندگو |
18 اینچ |
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.