K-Array Anakonda-KAN200
تماس برای خرید
Lightweight and able to take any form, the Anakonda-KAN200 is a truly revolutionary speaker. These loudspeakers are 2 meters long with 8 x 1″ drivers that deliver a max power of 300W at 64Ω impedence. Integrated male and female Speakon NL4 connectors hide all connections inside the body of the speaker. And by using two amplifier channels with the dedicated K-ANLINK accessory, you can extend your Anakonda system to up to 32 units – 64 meters – which creates an elegant, seamless line of continuous sound. Its dedicated presets work on a wide frequency range and can be used as an audio system in combination with K-array subwoofers.
The main product models and codes are:
KAN200 black model
KAN200W white model
All Anakonda-KAN200 components are designed by the K-array R&D department and are custom-made under the K-array quality control system in Italy.
Specifications
General
-
Type:
Line array
-
Transducers:
8 x 1″ neodymium magnet woofer
-
Frequency Response:
150 Hz – 18 kHz (-6 dB)
(1) -
Max SPL:
102 dB (peak)
(2) -
Rated Power:
150 W
-
Coverage:
V. 10° | H. 140°
-
Connectors:
SpeakOn NL4 1+ 1- (signal); 2+ 2- (through)
-
Nominal Impedance:
64 Ω
Handling and Finishes
-
Dimensions (W x H x D):
2000 (±20mm) x 56 x 35 mm (79.5 (±0.8 in) x 2.2 x 1.4 in)
-
Weight:
1.4 kg (3.1 lb)
-
Material:
PVC/Neoprene
-
Colors:
Black, White
Regulations
-
IP Rating:
IP64
- (1) With dedicated preset.
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m.
- Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
- New materials and design are introduced into existing products without previous notice.
| برند |
K-ARRAY | کی ارری |
|---|
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.