Dynacord TS 400

Features:

• The TS 400 was designed to provide a very even and smooth coverage over a very wide bandwidth by using spaced and filtered woofers as array elements.
• The 2.5 way design places elements at the ends of the column for maximum distance to lower the effective controlled frequency.
• The MF-elements and the HF-element are placed in the middle of the cabinet for a smooth transition of the mids to the HF and to extend the coverage control.
• Each group of elements has its own bandpass filter to optimize the array’s performance to provide good attenuation at 90° off-axis and evenly cover the audience area front to rear with half the rate of attenuation of a non “steered” cluster.
• The TS 400 is equipped with 4 x 6,5” DND 6130-16 Neodymium woofers and one Electro-Voice DH3 compression driver coupled with a 90° by 40° constant directivity horn providing very high SPL and excellent coverage.
• Power handling is 600W RMS / 2.400W peak.
• Separate protection circuits for the LF-, MF- and HF-elements are used to protect all transducers at the highest power levels.
• The TS 400 enclosure is aluminum for a very robust but lightweight design with a look that fits any environment.